Cable Modem Tuners
  Cable modem tuner-30cc | Cable modem tuner-42cc|
Double conversion-25cc&32cc | QAM NIM-30cc | Single Conversion-34c
   Cable Modem TU - 30 CC top | next
 
»çÁø
Ư¡
ccable30TU.gif

TECC1040PG30M
- Cable Modem application
- It covers frequency range from 88 to 860 MHz for downstream signals,
and 5 to 42 MHz for the upstream signals
- DC/DC converter is built-in
   
  APPLICATION
  - Cable MODEM
     
  PRODUCTS LINE-UP
 
Model Tuning Votage
TECC1040PG30M With DC/DC converter
TECC1040PG30P Without DC/DC converter
     
  ELECTRICAL CHARACTERISTICS
 
ITEM Specification
Voltage gain 35 dB (MIN)
Noise Figure 10 dB (MAX)
Phase Noise 80 dBc/Hz (MIN)
Ant Radiation -40dBmV ( < 860 MHz )
-20dBmV ( <1740 MHz)
Upstream Return loss 6 dB ( 5 ~ 42 MHz )
Upstream insertion loss 2 dB ( 5 ~ 42 MHz )
     
   Cable Modem TU - 42 CC top | next
 
»çÁø
Ư¡
ccable42TU.gif

TDMN01AU0H03C
- Cable Modem Tuner is a complete RF transceiver and tuner designed
for using in cable modem applications.
- It integrates a diplexer filter,RF transmitter,IF agc.
- It covers a frequency range from 50 to 860MHz for the downstream
signals, and 5 to 42MHz for the upstream signals.
- It's used to a single conversion approach with the reception
frequency range in VHF low,VHF high and UHF.
- Bandselection and tuning is done by PLL IC.
   
  APPLICATION
  - Cable MODEM
     
  PRODUCTS LINE-UP
 
Model IF Center Frequency
TDMN01AU0H03C 5.75MHz
TDMN01AU0H03B 43.75MHz
     
  ELECTRICAL CHARACTERISTICS
  - TUNER BLOCK(Downstream)
 
Input Frequency Range 55 ~ 860 MHz (Edge to Edge)
Input Signal Level -20 ~ +20 dBmV
Voltage Gain 60dB typ. 80dB max.
Noise Figure 8dB typ. 10dB max. (at max. gain)
RF AGC Range 25dB min. 50dB typ.
(Vagc = 1 ~ 4V ,reverse)
IF AGC Range 20dB min. 25dB typ.
(Vagc = 1 ~ 4V ,reverse)
IF center frequency 5.75MHz ¡¾0.05MHz
(or 43.75MHz ¡¾0.05MHz)
IF Output level 1V(p-p)@1K§Ù
(Load:220§Ù,balanced output)
IF Rejection 50min. 80typ.
Image Rejection 55min. 65typ.
Spurious Signals at Input Terminal ( without Tx Input)
Discrete Sp.
(except L.O. leakage)
5 ~ 42MHz
42 ~ 860MHz
135 ~ 901MHz
- 60dBmV max.
- 55dBmV max.
- 50dBmV typ. -45dBmV max.
Phase Noise @ 1kHz
@ 10kHz
@ 100kHz
- 65dBc/Hz typ. -55dBc/Hz max.
- 85dBc/Hz typ. -80dBc/Hz max.
- 105dBc/Hz typ. -100dBc/Hz max.
  - TX BLOCK(Upstream)
 
Operating Frequency Range 5 ~ 42MHz
Input Level 33dBmV typ. 35dBmV max.
Output Level
(Antenna input terminated with 75§Ù)
MAX
MIN
58dBmV typ. 60dBmV max.
6dBmV typ. 8dBmV max.
Gain Steps 0.7dB ~ 1.3dB
     
   Double Conversion Cable Tuner    - 25CC & 32CC top | next
 
»çÁø
Ư¡
cdoubleTU.gif

DTNM2500AWA
- For Digital & Analog CATV TUNER
- Double Conversion 2PLL SYSTEM, & Double Conversion ONE chip system
- Wide receiving dynamic range
- B+ voltage is available for 9V and 9V
- ONE chip & 2 chip soluation
- High interference rejection & Low phase noise
   
  APPLICATION
 
¡¡ U.S.A MAKET EUROPE MAKET
RF Input frequency 54 to 862mhz 48 to 862mhz
RF Input level digital (-75dBm to 5dBm) & Analog (-15dBmV to 15dBmV)
PLL Interface 12C & 3 Wire I2C & 3 Wire
Output frequency digital & analog (45.75/44mhz) digital & analog (38.9/36.125mhz)
Total power gain 38 ¡¾ 6dB 38 ¡¾ 6dB
Noise figure Typical 7dB Typical 7dB
Total phase noise Typical 85dB(at 10khz off_set) Typical 85dB(at 10khz off_set)
Up / Down stream 5 to 42mhz, 54 to 862mhz 5 to 42mhz, 48 to 862mhz
IF output 45.75mhz, 44mhz 38.9mhz, 36.125mhz
     
  PRODUCTS LINE-UP
 
MODEL NAME Digital Set_Top Box MAKET
DTNM3200AWA Digital DTV Tuner (3WIRE) U,S,A / EUROPE
DTNM3200AIA Set-topDIGITAL TU (I2C) U,S,A / EUROPE
DTNM3200AIB Digital R/C Tuner (I2C) U,S,A / EUROPE
DTNM3203AIA Digital RF Tuner (I2C) U,S,A / EUROPE
DTNM2500AWA Digital R/C Tuner (3WIRE) U,S,A / EUROPE
DTNM2500AIA Digital R/C Tuner (I2C) U,S,A / EUROPE
DTNM2502AIA Digital Terrestrial TU (I2C) U,S,A / EUROPE
     
   QAM NIM - 30 CC top | next
 
»çÁø
Ư¡
cqamTU.gif

TCMU30311PSB
- Input Frequency Range : 48MHz - 860MHz
- IF Center Frequency : 36.125MHz(PAL)
- Interface : I2C
- Symbol Rate Rnage : 2.0 - 7.0Msps
- QAM Constellation : 4, 16, 32, 64, 128, 256
- FEC : ITU-T J.83 Annex A/C Compliant.
- BS Tuner, QAM Tuner output(TS) pin compatible.
   
  APPLICATION
  - Digital CATV STB.
     
  ELECTRICAL CHARACTERISTICS
 
ITEM Specification
Voltage gain 35 dB (MIN)
Noise Figure 10 dB (MAX)
Phase Noise 80 dBc/Hz (MIN)
Ant Radiation -40dBmV ( < 860 MHz )
-20dBmV ( <1740 MHz)
Upstream Return loss 6 dB ( 5 ~ 42 MHz )
Upstream insertion loss 2 dB ( 5 ~ 42 MHz )
     
   Single Conversion - 34C Series top | next
 
»çÁø
Ư¡
csingleTU.gif

TECC2949PG34C
- UHF/VHF tuner for analog and digital cable applications
- All channel assignments are available. (Europe,China)
- Controlled PLL tuning programmed via I2C-bus
- WORLD STANDARD PIN CONFIGURATION
- Single 5V power supply
- IEC and F-type input connector
- Broad band input match
- Avaiable the symmetrical IF output Which can direct-drive the SAW
   
  APPLICATION
  - Digital cable settop box or TV set
     
  PRODUCTS LINE-UP
 
Model INPUT CONNECTOR
TECC2949PG34C IEC CONNECTOR
TECC2749PG34C PIN